
Alloy Composition & Metal Grade Verification – KT-100S by Rigaku
KT-100S handheld LIBS metals analyser allows you to confirm alloy composition and metal grade verification, so you don’t have to worry about a costly metal mix-up. Expand your metals analysis capabilities by upgrading your metals analyser today!
KT-100S metals analyser offers unique benefits that have not been available for rapid metals analysis:
- Results in less than 2 seconds at the touch of 1 button
- Less downtime with 6-hour battery life
- Only MIL STD 810G certified rugged handheld LIBS
- Protection against dust with an IP-54 rating
- GPS tracking
- No argon purge required
KT-100S Alloy Composition & Metal Grade Verification
Metals analysis to confirm alloy composition and metal grade verification is imperative to many industries. On-the-spot metals analysis throughout the fabrication process and beyond is critical, as even the smallest component could have detrimental effects if the incorrect alloy composition or metal grade is used.
To meet the ever-increasing demands of modern metal production, metals verification/analysis required for quality control and assurance is now possible at every stage during fabrication with the KT-100S metals analyser. The integration of LIBS technology with the most rugged handheld tool available means fab shops and others can now measure specific elements in aluminium, copper, and stainless with a tool that can withstand harsh shop environments.
Fabricators no longer have to be afraid of having their employees use delicate metals analysis equipment with a short battery life that does not last more than a few hours. KT-100S handheld LIBS obtains faster results. You can easily use KT-100S to confirm alloy composition and metal grade verification on your loading dock at the incoming receipt, during in-process manufacturing, welding, and final check – with an extended battery life of 6 hours!
Don’t risk a costly material mix-up by relying on a Mill Test Report or Mill Test Certificate.
KT-100S Metal Verification Analyser
KT-100S metals analyser was designed to integrate seamlessly into your fabrication process. Provide your team with an easy-to-use, smart-phone inspired, small and lightweight device designed for one-handed operation for minimal operator fatigue. Features include a large onboard library and memory that can store over 4,000 measurements.
KT-100S metals analyser offers unique benefits that have not been available for rapid metals analysis throughout the manufacturing process and beyond using handheld LIBS:
- Results in less than 2 seconds at the touch of 1 button
- Less downtime with 6-hour battery life
- Only MIL STD 810G certified rugged handheld LIBS
- Protection against dust with an IP-54 rating
- GPS tracking
- No argon purge required
Metals analysis using KT-100S handheld LIBS metals analyser allows you to confirm alloy composition and metal grade verification at every step of your manufacturing process, so you don’t have to worry about a costly metal mix-up. Expand your metals analysis capabilities by upgrading your metals analyser today!
ADVANCED PERFORMANCE
- Proprietary 1064nm Class 3B laser excitation with low ocular safety distance (NOCD)
- Miniature, high resolution, high throughput spectrometer with CMOS detector for optimized performance
- Spectral range covering the most relevant alloying elements and spectral features
- User selectable “Drill Down” for surface preparation to enable improved analysis
QuickID™ SOFTWARE
- Rapid matrix selection, chemical composition and grade ID with no user input required
- Password protected with automatic “sleep mode” for improved safety and battery life
- On-board camera for capturing sample image and bar code reader for easy data entry
ACCESSORIES
- Docking station for battery charging
- Holster for safe keeping when on the move
- Rechargeable Li-ion battery for 6+ hours of continuous operation
- Aluminum alloy verification sample
SOPHISTICATED ERGONOMICS
- Pistol shaped for optimal one-handed operation: 24.3cm
- L x 8.4cm W x 25.7cm H (9.55”L x 3.30”W x 10.10”H) and weighing~1.5kg (3.25lbs)
- MIL-STD-810-G certified rugged/drop tested for reduced repair costs
- IP-54 rated for protection against dust/water for no weather-related delays
- 5” high resolution tiltable screen allows for high visibility in confined spaces and outdoors
- Choice of user interface:
- Smartphone-inspired touchscreen provides fast learning curve
- Large Softkey buttons for one-handed operation while wearing protective gloves
- Unique “Quick Launch” handle buttons enable one-handed operation
CONNECTIVITY
- USB, WiFi connection for simple viewing and download to any PC or mobile device
- Easy addition of any alloy grade using Rigaku Library Editor software
- Generate verification certificates that include company logo, photo, data entry and analysis results
ADDITIONAL SERVICES
- On-board System/Calibration verification program
- Small sample insert for analyzing turnings and other small samples
OTHER SPECIFICATIONS
- Certifications: FDA 1040, CE, ISO 9001:2008 Certified Manufacturing facility
- External battery charger: 100~240VAC
- Operating temperature of 5 to 40°C
- Warranty of 12 months
Modern Scrap Metal Sorting
Watch KT-100S Environmental & Ruggedness Testing Results
Click Here to download the KT-100S Spec Sheet
Click Here to download the KT-100S Brochure
Click Here to check Cost of Ownership/ Maintenance
Related Products

Newsletter Signup
Sign up to our newsletter for the most up-to-date development of products, industry news, special offers and much more!
Location: IRELAND
Unit 21, Waterford Business Park,
Cork Road, Waterford
Ireland, X91 P224
E-mail:
Contact: UK
Tel: +44 (0)20 346 898 13
E-mail: info@antechsolutions.co.uk
Web: www.antechsolutions.co.uk